User's Manual
Table Of Contents
- Handset settings
- Installation options
- Battery installation and charging
- Telephone base and charger installation
- Installation
- Set date/time
- Clear voicemail indication
- Save your speed dial voicemail number
- Voicemail (visual message waiting) indicator
- Caller ID announce
- Push-to-talk (PTT)
- Call transfer using intercom
- Answer an incoming call during an intercom call
- Intercom
- Multiple handset use
- Options while on calls
- Telephone operation
- Rename handset
- Handset settings
- Installation options
- Battery installation and charging
- Telephone base and charger installation
- Installation
- Set date/time
- Clear voicemail indication
- Voicemail (visual message waiting) indicator
- Set speed dial voicemail number
- Caller ID announce
- Rename handset
- Telephone operation
- Multiple handset use
12
Getting started
Installation options
Wall mount to tabletop installation
1. If the telephone line cord and power adapter cord are bundled, untie
them first. Push the telephone base up to remove it from the wall. Unplug
the telephone line cord (or DSL filter) from the wall. Unplug the power
adapter from the power outlet.
2. Swivel the wall mount bracket up to tabletop position and push it into the
telephone base until it clicks into place.
3. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch. Bundle
the telephone line cord and power adapter cord neatly with twist ties.
1 2
3