User's Manual

Answering system

Answering system settings

Remote access code

To access your answering system remotely from any touch-tone phone, you

need to enter a two-digit number (00-99). By default, the remote access code

is 19.

To change the remote access code:

Using a cordless handset or the telephone base:

1. When the handset or telephone base is in idle mode,

press MENU/SELECT to enter the main menu.

2. Press qCID or pDIR to scroll to Answering sys, then

press MENU/SELECT.

3. Press qCID or pDIR to scroll to Ans sys setup, then

press MENU/SELECT.

4. Press qCID or pDIR to scroll to Remote code, then press MENU/SELECT.

5. Use the dialing keys to enter a two-digit number. Press MUTE/DELETE on

the handset or X/DELETE on the telephone base to backspace and delete

a digit.

6. Press MENU/SELECT to save the setting. You hear a confirmation tone.