User's Manual

91
Answering system
Answering system settings
Message alert tone
When the message alert tone is set to On, the telephone base beeps every
10 seconds to alert you to new messages. The tone stops when all new
messages have been reviewed. By default, the message alert tone setting is
Off.
To change the setting:
Using a handset or telephone base:
Press MENU in idle mode to enter the main
menu.
Use
CID or DIR on the handset, or CID or DIR
on the telephone base to scroll to Answering sys,
then
press SELECT .
Use
CID or DIR on the handset, or CID or
DIR on the telephone base to scroll to Ans sys
setup, then
press SELECT .
Press
CID or DIR on the handset, or CID or
DIR on the telephone base to scroll to Msg alert
tone, then press SELECT .
Press CID or DIR on the handset, or CID or DIR on the
telephone base to choose between On and Off, then press SET
to save your setting. You hear a confirmation tone.
NOTES:
You cannot set the message alert tone when another handset or the telephone base is
accessing the answering system.
The message alert tone beeps only if all the conditions below are met.
Answering system is on.
Message alert tone setting is on.
There are new messages.
1.
2.
3.
4.
5.
•
•
–
–
–
ANS SYS SETUP
# of rings
Remote code
Msg alert tone
BACK SELECT
MSG ALERT TONE
On
Off
BACK SET
ANS SYS SETUP
# of rings
Remote code
Msg alert tone
BACK SELECT
MSG ALERT TONE
On
Off
BACK SET