User's Manual

90
Answering system
Answering system settings
Remote access code
A 2-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can change the
code to any number from 00 to 99.
To change the remote access code:
Using a handset or the telephone base:
Press MENU in idle mode to enter the main menu.
Use CID or DIR on the handset, or CID or DIR on the
telephone base to scroll to Answering sys, then
press SELECT .
Use CID or DIR on the handset, or CID or DIR on the
telephone base to scroll to Ans sys setup, then
press SELECT .
Press CID or DIR on the handset, or CID or DIR on
the telephone base to scroll to Remote code, then
press SELECT .
Use the dialing keys (0-9) to enter a 2-digit number from
00-99.
Press MUTE/DELETE on handset, or DELETE/X
on the telephone base to erase a digit.
Press and hold
MUTE/DELETE on the handset
or DELETE/X on the telephone base to erase
all digits.
Press
CID or DIR on the handset or CID or
DIR on the telephone base to move the cursor to the right or
left.
Press SET to save. You hear a confirmation tone.
1.
2.
3.
4.
5.
•
•
•
ANS SYS SETUP
Call screening
# of rings
Remote code
BACK SELECT
REMOTE CODE
19
BACK SET
ANS SYS SETUP
Call screening
# of rings
Remote code
BACK SELECT
REMOTE CODE
19
BACK SET