User's Manual

86
Answering system
Answering system settings
Record your own announcement
Using a handset or telephone base:
Press MENU on the handset in idle mode to enter the main menu.
Press
CID or DIR on the handset or CID or DIR on the telephone base
to scroll to Answering sys, then press SELECT .
Press SELECT again to select Announcement.
The screen displays ANNOUNCEMENT. The handset announces,
“Announcement, press PLAY or RECORD.” Press RECORD .
The telephone announces, “Record after the tone. Press STOP when you
are done.” After the tone, speak towards the microphone of the handset or
telephone base.
Press STOP when you finish recording.
The telephone automatically plays back the newly recorded announcement.
Press STOP to stop the playback at any time. After the announcement
playback, press PLAY to replay the recorded announcement, or
RECORD to record again if desired.
NOTES:
Your announcement can be up to 90 seconds in length.
Announcements shorter than 2 seconds are not recorded.
1.
2.
3.
4.
5.
6.
7.
•
•