User's Manual

53
Multiple handset
Push-to-talk (PTT)
Using the telephone base:
Press PTT when the telephone base is not in use. The
PUSH TO TALK menu displays.
Press
CID or DIR to highlight PTT On/Off, then press SELECT .
Press CID or DIR to highlight On or Off, then press SELECT to save. You
hear a confirmation tone.
PTT to a single device
Using a handset:
To begin a PTT call to a single device:
Press PUSH TO TALK when the handset is not in use. Use the
dialing keys to enter a device number (0 for telephone base,
1-9 for handsets
1-9, TONE and 0 for handset 10, TONE and 1 for handset
11, or TONE and 2 for handset 12) to create the push-to-talk
session.
-OR-
Press PUSH TO TALK when the handset is not in use. Then press
CID or DIR to scroll to the desired handset or the telephone
base. Press SELECT or PUSH TO TALK to create the push-to-talk
session.
Your handset displays Connecting to HANDSET X... or Connecting to
BASE 0... for a few seconds. When the connection is made, both yours and
the destination handsets display Press and hold [PTT] to talk and beep
once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset. While you are speaking, the handset displays PTT
To HANDSET X (X represents the destination handset number) or PTT To
BASE 0.
Release PUSH TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination device can respond (see Answer a PTT call on
page 57).
1.
2.
3.
1.
•
•
2.
3.
4.