User's Manual

44
Telephone operation
Redial
The telephone base and each handset store the last 10 dialed numbers (up
to 30 digits each) in the redial list. The redial entries of each handset and the
telephone base are independent.
To dial a redial entry on a handset:
Press
HOME/FLASH , or /SPEAKER to use the home line, or
CELL 1 or CELL 2 to use the cell line. Then press REDIAL/PAUSE to
enter the redial list.
Press CID , DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays. The handset beeps twice at the end of the list.
Press DIAL to dial the number displayed.
You can also select a redial entry before dialing.
Press REDIAL/PAUSE in idle mode.
Press CID , DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays. The handset beeps twice at the end of the list.
Press HOME/FLASH , or /SPEAKER to use the home line, or
CELL 1 or CELL 2 to use the cell line.
To dial a redial entry on the telephone base:
Press HOME to use the home line, or
CELL 1 or CELL 2 to use the cell line. Then press REDIAL/PAUSE to
enter the redial list.
Press CID, DIR or REDIAL/PAUSE repeatedly to browse and then press
DIAL to dial the number displayed.
You can also select a redial entry before dialing.
Press REDIAL in idle mode.
Press CID , DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays. The telephone base beeps twice at the end of the list.
Press HOME to dial using the home line, or CELL 1 or CELL 2 to dial
using the cell line.
1.
2.
3.
1.
2.
3.
1.
2.
1.
2.
3.