User's Manual

39
Telephone operation
Options while on calls
Speakerphone
Using a
handset:
During a call, press
/SPEAKER on the handset to switch between the
speakerphone and normal handset use.
Using the telephone base:
The speakerphone is the only audio option for the telephone base. Press
HOME , CELL 1 or CELL 2 to place, answer, and to end calls from the
telephone base.
Volume control
While on a call, you can adjust the listening volume on the handset or
telephone base.
If it is a cell call and the volume is too loud, too quiet or drops out, try
changing the volume on your cell phone. On some cell phones, changing
the volume on the cell phone affects your cell call volume on the TL96273/
TL96373/TL96473/TL96323 handsets or telephone base.
To adjust the listening volume of a handset:
Press VOLUME on the handset while on a call.
To adjust the listening volume of the telephone base:
Press VOLUME on the telephone base while on a call.
NOTE: The handset earpiece volume setting (1-6) and speakerphone volume setting (1-6)
are independent. The speakerphone volume setting of the telephone base (1-8) is also
independent.
Silencing the ringer
When the telephone is ringing, you can temporarily silence the ringer of the
handset or telephone base without disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
Press SILENCE , OFF/CANCEL or MUTE/DELETE on the handset and Ringer
muted appears.
To silence the base ringer:
Press SILENCE .
-OR-
Press MUTE.
The telephone base displays Ringer muted.
•
•
•
•
•