User's Manual

Telephone operation

Make, answer and end a call

Using the telephone base:

To make a cell call:

Press CELL 1 or CELL 2, then enter the telephone number.

Press DIAL .

To predial a cell call:

Enter the telephone number, then press CELL 1 or CELL 2.

To answer or end a cell call:

Press CELLULAR.

NOTES:

You can also use your cell phone to answer the call. If you answer with your cell phone, it

disconnects from the telephone base.

If you do not want to answer the call, press

REJECT . The screen displays Call rejected

and then returns to the idle mode.

When you try to make a cell call but your cell phone is not connected to the base, the

telephone base displays Cellular phone not connected. Press

CONNECT to connect your

cell phone to the telephone system. Refer to Bluetooth connection from idle mode on

page 17 and Connect/disconnect an active device on page 18.

Call waiting on the cell line

If you subscribe to call waiting service from your cell phone service provider,

you hear a beep if someone calls while you are already on a call.

Using a handset:

Press CELL 1 or CELL 2 on the handset to put your current call on hold

and take the new call.

Press CELL 1 or CELL 2 on the handset at any time to switch back and

forth between calls.

-OR-

Press SWAP to switch. To switch back, press OPTION . Press CID or DIR to

highlight Swap, then press SELECT .

Using the telephone base:

Press SWAP on the telephone base. The original call is put on hold and you

take the new call.

Press OPTION on the telephone base. Press CID or DIR to highlight

Swap. Press SELECT to resume the original call. The other incoming cell call

is put on hold.

•