User's Manual

33
Telephone operation
Make, answer and end a call
Using a Bluetooth headset:
You can use a Bluetooth headset for home calls. However, you need to keep
the device within 15 feet of the telephone base for optimal performance.
Please see the user’s manual of your Bluetooth headset for more information.
To answer a home call using a Bluetooth headset:
Press
CELL 2 on the telephone base or the call key on your headset.
To end a home call:
Press CELL 2, or the call key on your headset.
To transfer a call from the telephone base to a Bluetooth headset:
Press CELL 2, then press SELECT or CELL 2 again to choose the
headset. The telephone base displays Transferring audio to Headset A.
To transfer a call from the Bluetooth headset back to the telephone base:
Press HOME.
NOTES:
If you are on a call using a Bluetooth headset, and you lose the Bluetooth connection
or the battery becomes depleted, the call is lost.
When you try to use a Bluetooth headset that is not connected to the base, the
telephone base displays Headset not connected! Press CONNECT to connect your
headset to the telephone system. Refer to Bluetooth connection from idle mode on
page 17 and Connect/disconnect an active device on page 18.
While using the cell line, you cannot use the Bluetooth headset.
Call waiting on the home line
If you subscribe to call waiting service from your telephone service provider,
you hear a tone if someone calls while you are already on a call.
Press HOME/FLASH on the handset, or press FLASH on the telephone
base to put your current call on hold and take the new call.
Press the same key at any time to switch back and forth between calls.
•
•
•
•
•
•
•
•
•