User's Manual

Telephone settings

Handset and telephone base settings

Quiet mode

You can turn on quiet mode for a period of time (1-12 hours). During this

period, all tones (except paging tone) and call screening are muted.

When you turn on the quiet mode, the answering system turns on

automatically. When the quiet mode duration expires, the answering system

remains on.

To set and turn the quiet mode on:

Press and hold QUIET# when the handset/telephone base is not in use. The

screen shows Quiet: _ _ hours (1-12).

Use the dialing keys to enter the desired duration (1-12), then press SELECT.

All screens display Quiet mode on and . The /ANS ON/OFF light on the

telephone base turns on.

To turn the quiet mode off:

While the quiet mode is on, press and hold QUIET#. The screen displays

Quiet mode off briefly and then returns to idle.

NOTE: When you change the settings of the ringer tone or ringer volume, you can still hear

the samples even if the quiet mode is on.

Caller ID announce

The caller ID announce feature lets you know who’s calling without having to

look at the display.

To change the setting:

Press MENU on the handset or telephone base in idle mode to enter the

main menu.

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to highlight Settings, then press SELECT .

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to highlight Caller ID Annc, then press SELECT .

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to choose On or Off, then press SET to save.

NOTES:

To use the caller ID announce feature, you must subscribe to caller ID service from your

telephone service provider.

Pronunciation of names may vary with this feature. Not all names may be

pronounced correctly.

•