User's Manual

Telephone settings

Handset and telephone base settings

Set date and time

The answering system announces the day and time of each message prior

to playing it. Before using the answering system, set the date and time as

follows. If you subscribe to caller ID service, the day, month and time are set

automatically with each incoming call. The year must be set so that the day

of the week can be calculated from the caller ID information.

Press MENU in idle mode to enter the main menu.

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to highlight Set date/time, then press SELECT .

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to select the month, then press SET ., or enter the 2-digit

number (01-12) using the dialing keys (0-9).

Press

CID or DIR on the handset, or press CID or DIR

on the

telephone base

to select the day,

then press SET .

, or enter the 2-digit

number (01-31) using the dialing keys (0-9)

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to select the year, then press SET, or enter the 2-digit

number (00-99) using the dialing keys (0-9), then press SET .

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to select the hour, then press SET ., or enter the 2-digit

number (01-12) using the dialing keys (0-9).

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to select the minute, then press SET ., or enter the 2-digit

number (00-59) using the dialing keys (0-9).

Press CID or DIR on the handset, or press CID or DIR

on the

telephone base to highlight AM or PM, or press 2 for AM

or 7 for PM. Press

SET to save. You hear a confirmation tone.

NOTE: If the date and time are not set when a message is recorded, the system announces,

“Time and day not set,” before each message plays.