User's Manual

16
Bluetooth
Bluetooth setup
Add a headset
Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's manual
to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
Press MENU on the telephone base in idle mode to enter the main menu.
Press
CID or DIR to highlight Bluetooth, then press SELECT .
Press SELECT to choose Add device.
Press CID or DIR to highlight Add headset, then
press SELECT . The screen displays Please wait... followed by If headset is
connected to cell, please disconnect it.
If there are already 4 paired devices on the device list, the 4th device on
the device list will be automatically removed, regardless of whether the
new device pairing is successful or not.
If there is another headset already active, the screen will show Only 1
headset in device list can be ready for connection and prompts you to
replace an existing paired device.
If there are already 2 active devices on the device list with prefix D1: or
D2:, the screen shows Only 2 devices can be ready for connection. The
screen prompts you too deactivate an active device.
Press NEXT . The screen displays Pls set headset to discoverable mode.
Set your headset to discoverable mode (refer to the user’s manual of your
headset), then press NEXT .
All devices that are connected to the telephone base are temporarily
disconnected.
The screen displays Searching for Bluetooth headsets...
When the screen displays the found devices, press CID or DIR to
highlight your headset and then press SELECT .
Enter the PIN of your headset. The PIN for most Bluetooth devices is 0000
(refer to the user’s manual of your headset). Then press NEXT .
The screen displays Adding Headset A to device list... when the base is
connecting to your headset.
When a device is successfully connected, the telephone base displays
Headset A is added and connected to base and the corresponding status
icon ( 1 or 2). You hear a confirmation tone. The corresponding light on
the telephone base (CELL 1 or CELL 2) turns on.
If you have trouble pairing your headset, it may not be compatible
with your TL96273/TL96373/TL96473/TL96323. Check the Bluetooth
compatibility list at www.telephones.att.com.
1.
2.
3.
4.
•
•
•
5.
•
6.
7.
8.
9.
10.