User's Manual

Bluetooth

Glossary of terms

Below are some terms used in this user’s manual to help you become familiar

with using your Bluetooth devices and your new AT&T telephone system.

Active devices - the Device list has two active slots for two cell phones, or

one cell phone and one headset. When a device in the list is active it will have

a D1: or D2: in front of the device name. In order to use a Bluetooth device on

a call, it must be in an active slot and be connected

Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.

CELLULAR line - the telephone line associated with your cell phone service.

On your TL96273/TL96373/TL96473/TL96323, press CELLULAR on the

handset or CELLULAR on the base to use the cell line.

Connected - when you pair a Bluetooth device to the TL96273/TL96373/

TL96473/TL96323 it is placed in an active slot and automatically connected.

When a device is connected, a 1 and/or 2 will display after on the handset

screen and the CELL 1 and/or CELL 2 light on the telephone base will be on.

If a device loses its connection to the telephone base, it must be reconnected

before you can use the device with the TL96271.

Device list - The list of devices connected to the telephone.

Disconnected - when a device is disconnected, 1 and/or 2 displays after on

the handset screen and the CELL 1 and/or CELL 2 light on the telephone base

is off.

Discoverable mode - before a Bluetooth enabled device can be paired, it must

be set to this mode. When pairing your cell phone, the telephone base is set to

this mode. Depending on the cell phone manufacturer, this mode is sometimes

referred to as Find Me or Visibility.

Paired devices - The Bluetooth enabled devices (cell phones or headsets) that

have shared registration information with the telephone base. A total of four

Bluetooth enabled devices can be paired to the telephone base. However, only

two paired devices can communicate with the base at a time.

Pairing - sometimes referred to as bonding. The process of sharing

registration information between two Bluetooth enabled devices. Your

Bluetooth enabled cell phone or headset must first be paired to the telephone

base in order to use it with this telephone system.

PIN - by default, the PIN is 0000 for the telephone base and for most

Bluetooth devices. PIN information may be exchanged between Bluetooth

devices before they can be used. This is also known as a Passkey

or Passcode.