User's Manual

37
Telephone settings
Handset settings
Website
You can use this feature to view the AT&T website address.
Press MENU on the handset in idle mode to enter the
main menu.
Use
CID or DIR to scroll to Website, then press
SELECT. The handset screen shows the AT&T
website address.
Press OK to exit.
Home area code
If you dial 7 digits to make a local call (area code not required), enter your
area code into the telephone as the home area code. When you receive a
call from within your home area code, the caller ID history only displays the
7 digits of the telephone number.
This feature makes it easy for you to place a call from the
caller ID log. If you dial 10 digits to make a local phone
call, do not use this home area code feature. If you do, you
cannot place local calls from your caller ID log, as they will
have only 7 digits.
To set the home area code:
Press MENU on the handset in idle mode to enter the main menu.
Press CID or DIR to highlight Directory, then press SELECT.
Press OPTION to choose Home.
Press CID or DIR to highlight Home area code, then press SELECT.
The screen displays Only for 7 digits dialing from Caller ID log.
Use the dialing keys to enter the desired home area code.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press CID or DIR to move the cursor to the right or left.
Press SET to save. The handset displays Area code will not show in
Caller ID log. You hear a confirmation tone.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to
make a local call (area code + telephone number), you will need to delete your home area
code. With the home area code displayed, press and hold
MUTE/ DELETE , and then press
SET. The home area code is now restored to its default setting of _ _ _ (empty).
1.
2.
3.
1.
2.
3.
4.
5.
•
•
•
6.
HOME AREA CODE
---
BACK SET
Ringers
Set date/time
Settings
Website
BACK SELECT
www.telephones
.att.com
OK