User's Manual

Bluetooth

Bluetooth setup

Device list and connection

Up to 4 devices can be paired to the telephone base. All paired devices are

shown on the device list. To use a paired device, it must be connected and

in an active slot (CELL 1 or CELL 2) on the device list. Two Bluetooth cell

phones can be on a call at a time. While you are on a CELL 1 call using the

handset or telephone base, you can also use a Bluetooth headset to make or

answer a home call.

Once you have paired a device with the telephone base, you do not need

to repeat the pairing procedure again unless you delete the device from the

device list.

NOTE:

When connecting a Bluetooth device to the device list, all connected devices will

be temporarily disconnected until the procedure is complete. It may take up to 2 minutes

to reconnect.

Review the active device list

Press MENU on the handset when it is not in use.

Press

CID or DIR to highlight Bluetooth, then press SELECT.

Press CID or DIR to highlight Device list, then press SELECT.

Connect/disconnect an active device

While in the active devices menu, you may connect or

disconnect your active device.

Press MENU on the handset when it is not in use.

Press CID or DIR to highlight Bluetooth, then

press SELECT.

Press CID or DIR to highlight Device list, then

press SELECT.

Press

CID or DIR to highlight a device, then

press OPTION.

Press

CID or DIR

to highlight Connect/Disconnect

(whichever is applicable), then press SELECT to confirm.

The handset displays Device connected/Device

disconnected. You hear a confirmation tone.

NOTE: When your active device is connected, you are prompted to

select Disconnect. When your active device is disconnected, you are

prompted to select Connect.

BLUETOOTH

Add device

Device list

Download dir

BACK

SELECT