User's Manual

36
Directory
The telephone system has 10 speed dial locations (2-9 and 0, location 1 is
reserved for voicemail) where you can store the telephone numbers you wish
to dial more quickly. You can store up to 30 digits in each location. Speed
dial assignments can only be selected from the existing directory entries,
with the exception of 1, which must be manually entered. In the directory,
speed dial locations except for 1 are indicated by their number in the bottom
right hand corner of the entry.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press TCID or SDIR to scroll to >Directory. Press
MENU/SELECT.
3. Press TCID or SDIR to scroll to >Speed dial. Press
MENU/SELECT.
4. Press TCID or SDIR to choose your desired speed dial
location (2-9, 0), then press MENU/SELECT. The screen
briefly shows Copy from Directory... then enters your
directory list.
5. Press TCID or SDIR to scroll to the phone number you
wish to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
Replacing a speed dial entry
1. When the telephone is idle, press MENU/SELECT.
2. Press TCID or SDIR to scroll to >Directory. Press MENU/SELECT.
3. Press TCID or SDIR to scroll to >Speed dial. Press MENUMENU/SELECT.
4. Press TCID or SDIR to choose the location (2-9, 0) you wish to reassign,
then press MENU/SELECT to show the directory entry.
5. Press MENU/SELECT again.
6. Scroll to >Change SD and then press MENU/SELECT. The screen briefly
shows Copy from Directory... then enters your directory list.
7. Press TCID or SDIR to scroll to the phone number you wish to reassign to
the selected speed dial location.
8. Press
MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
Speed dial
Add contact
>Speed dial
>2: <Unassigned>
3: Robert Brown