User's Manual

29
Multiple handset use
Use the intercom feature for conversations between 2 handsets. This
feature is only available if you have at least 2 system handsets. Intercom
is not available for the CRL32102 model. You can buy accessory handsets
(AT&T model CRL30102) to expand your system.
Use a handset to initiate intercom calls and transfer calls.
1. Press MENU/SELECT in idle mode to enter the main menu. Press TCID or
SDIR to scroll to >Intercom, then press MENU/SELECT. Choose from the
options below.
If you have a 2-handset system, your handset screen
shows Calling other handset.
If you have more than 2 handsets, your screen
shows INTERCOM TO: Use the dialing keys to eenter
a specific handset number (1-9 for handsets 1-9,
TONE followed by 0-2 for handsets 10-12, or TONE
followed by # for all handsets), or press TCID
or SDIR to scroll to the desired handset and press
MENU/SELECT. Your handset screen shows Calling
HANDSET X or Calling all handsets.
The other handset(s) rings and shows either Other
handset is calling, HANDSET X is calling all or
HANDSET X is calling (HANDSET represents the
handset name, X represents the handset number).
2. To answer the intercom call, press PHONE/FLASH,
/SPEAKERSPEAKER or any dialing key (0-9, TONE ,or#) on
any called handset. Both handsets now show Intercom.
3. To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger. The other party hears 4
beeps. Both handsets display Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing
OFF/CANCEL.
If the called handset is not answered within 100 seconds, or if it is in the directory or caller ID
log, or is on a call, or is out of range, the calling handset shows No answer. Try again.
Pressing
OFF/CANCEL or MUTE/DELETE temporarily silences the intercom ringer.
You can only use one pair of handsets to make intercom calls at a time.
•
•
•
•
•
•
Intercom
Calling
HANDSET 1
HANDSET 2
is calling
Intercom
10/20
10:30
PM