User's Manual

27
Telephone operation
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
1. During the call, press MENU/SELECT.
2. Press
MENU/SELECT to choose >Transfer.
If you have two handset, the outside call is put on hold
and your handset shows Transferring call... The other
handset rings and shows Transfer from other handset.
If you have more than two handsets, your screen
shows TRANSFER TO: Use the dialing keys to eenter a
specific handset number (1-9 for handsets 1-9, TONE
followed by 0-2 for handsets 10-12, or TONE followed by # for all
handsets), or press TCID or SDIR to scroll to the desired handset and
press MENU/SELECT. The outside call is put on hold and your handset
screen shows Transferring call... or Transferring call to all... The
other handset rings and shows Transfer from HANDSET X (HANDSET
represents the handset name, X represents the handset number).
3. To answer the call on the destination handset, press, press PHONE/FLASH or
/SPEAKERSPEAKER. The initiating handset shows Call transferred and goes to
idle mode.
•
•
Options while on calls
>Transfer
Intercom