User's Manual

23
Telephone operation
Handset speakerphone
During a call, press /SPEAKERSPEAKER to switch between handsfree speakerphone
and normal handset use. Press OFF/CANCEL to hang up.
NOTES:
When you use the speakerphone, the key pad of the handset and the
/SPEAKER
button are lit.
The speakerphone uses more power than the normal handset. If the handset
battery becomes very low while you are using the speakerphone, the call remains in
speakerphone mode until you hang up or the battery becomes depleted.
After installing a battery into the handset, the screen may show Low battery. If you
use the speakerphone at this time, the battery may become depleted. Follow the
instructions in the Battery installation and charging section on pages 7-8.
Last number redial
Each handset and the telephone base stores the last 10 telephone numbers
dialed (up to 30 digits each).
To view the ten most recently dialed numbers:
To display the most recently called number, press
REDIAL/PAUSE.
To view up to ten recently called numbers, press REDIAL/
PAUSE, then TCID, SDIR or REDIAL/PAUSE repeatedly.
Press OFF/CANCEL to exit.
To redial a number:
To dial the displayed number, press PHONE/FLASH or /SPEAKERSPEAKER.
-OR-
Press PHONE/FLASH or /SPEAKERSPEAKER, then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
To delete a redial entry:
While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
•
•
•
•
•
•
•
•
Telephone operation
REDIAL #1/3
888-883-2445