User's Manual

13
Telephone settings
Handset settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
also turn off the date and time settings of the caller ID service and set the
date and time manually (see Use caller ID to automatically set date and
time on page 19).
After a power failure or handset registration, the system prompts you to set
the date and time.
To set the date and time manually:
When the handset is in idle mode, press MENU/SELECT
to enter the main menu.
Press TCID or SDIR to scroll to >Set date/time and
then press MENU/SELECT.
Press TCID or SDIR to select the month (MM), then
press MENU/SELECT, or enter the number using the
dialing keys.
Press TCID or SDIR to select the day (DD), then
press MENU/SELECT, or enter the number using the
dialing keys.
Press TCID or SDIR to select the year (YY), then press
MENU/SELECT, or enter the number using the dialing
keys, then press MENU/SELECT to move on to set
the time.
Press TCID or SDIR to select the hour (HH), then
press MENU/SELECT, or enter the number using the
dialing keys.
Press TCID or SDIR to select the minute (MM), then press MENU/SELECT, or
enter the number using the dialing keys.
Press TCID or SDIR to highlight AM or PM, or press 2 for AM or 7 for PM.
Then press MENU/SELECT to confirm. There is a confirmation tone and the
screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time and
day not set,” before it plays the message.
1.
2.
3.
4.
5.
6.
7.
8.
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --