User's Manual

8
Speed dial
You can copy up to 9 directory entries into the speed dial locations so that you can
dial these numbers using fewer keys than usual.
To store a speed dial entry:
Press MENU when the handset is not in use.
Scroll to Directory then press SELECT.
Scroll to Speed dial, then press SELECT.
Scroll to a desired speed dial location, then press SELECT.
Scroll to a desired directory entry, then press SELECT to save.
To dial a speed dial entry:
Press and hold a dialing key (0-9, except 1) to display the desired speed dial
entry when the handset is not in use.
Press /HOME, or /CELL to dial the displayed phone number.
To delete a speed dial entry:
When the desired entry displays, press DELETE.
Caller ID
This product supports caller ID services provided by most telephone service
providers. Depending on your service subscription, you may see the caller’s name,
number, date and time of calls that are sent by your telephone service provider after
the rst or second ring.
Caller ID log
The caller ID log stores up to 50 entries. If you answer a call before the caller
information appears, it will not be saved in the caller ID log.
The handset displays XX missed calls when there are calls that have not been
reviewed in the caller ID log.
If you want to erase the missed call indicator, press and hold CANCEL on the
idle handset.
To review and dial a number in the caller ID log:
Press CID when the handset is not in use.
Scroll to browse through the caller ID log. When the desired entry appears:
Press # (pound key) repeatedly to show different dialing options.
Press 1 repeatedly if you need to add or remove 1 in front of the
phone number.
Press /HOME, or /CELL to dial the displayed number.
To save a caller ID log entry to the directory:
When the desired caller ID log entry displays, press SELECT.
Use the dialing keys to modify the number, then press SELECT.
Use the dialing keys to modify the name, then press SELECT to save.
To delete one caller ID log entry:
When the desired caller ID log entry displays, press DELETE.
To delete all caller ID log entries:
Press MENU when the handset is not in use. Scroll to Caller ID log and then
press SELECT. Scroll to Del all calls and then press SELECT twice.
About the answering system
The answering system can record up to 99 messages, depending on the length of
each message. The total recording time is approximately 14 minutes.
Answering system settings
Default settings are indicated by asterisks (*).
Screen display Function Options
Call screening Set whether you hear the callers while they are
leaving messages to you.
On*
Off
# of rings Set the number of times the telephone rings before
the answering system answers.
6; 5; 4; 3*; 2;
Toll Saver
Remote code Set a two-digit security code to access the
answering system remotely from any touch-tone
telephone.
19*
Msg alert tone Set to alert you when you have new messages. On
Off*
Recording time Set the recording time for each incoming message. 3 Minutes*
2 Minutes
1 Minute
1.
2.
3.
4.
5.
1.
2.
•
•
1.
2.
•
•
3.
1.
2.
3.
•
•