User's Manual
Table Of Contents
- Parts checklist
- Telephone base and charger installation
- Battery installation
- Battery charging
- Tabletop to wall mount installation
- Handset overview
- Telephone base overview
- Using the menu
- Telephone settings
- Telephone operation
- Directory
- Speed dial
- Caller ID
- Add and register a handset
- Replace a handset
- Troubleshooting
- Important safety instructions
- Precautions for users of implanted cardiac pacemakers
- Operating range
- Maintenance
- About cordless telephones
- The RBRCĀ® seal
- Limited warranty
- FCC, ACTA and IC regulations
- Technical specifications
3
Tabletop to wall mount installation
The telephone comes ready for tabletop use. Follow the steps below to mount your
telephone on a wall.
Route the telephone line cord
through the hole on the wall mount
bracket and plug it into the telephone
wall jack. Route the power cord out
of the telephone base and plug it into
an electrical outlet not controlled by a
wall switch.
3. Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it locks securely.
Bundle the telephone line cord
and power adapter cord neatly
with twist ties.
4.
Position the lower portion grooves
on the telephone base to the lower
portion tabs (marked B) on the wall
mount bracket. Make sure the upper
portion grooves of the telephone
base are above the upper portion
tabs (marked A) on the wall mount
bracket. Push the telephone base
down until it clicks securely in place.
2.Plug one end of the telephone line
cord into the TEL LINE jack at the
bottom of the telephone base and
the base power adapter into the
POWER jack.
1.
Handset overview
VOLUME/ /CID
Review the caller ID log when the
phone is not in use.
Decrease the listening volume during
a call or message playback.
Scroll down while in a menu, or in the
directory, caller ID log or redial list.
Move the cursor to the left when
entering numbers or names.
/HOME/FLASH
Make or answer a call.
Answer another incoming call
during a call.
MUTE/DELETE
Mute the microphone during a call.
Delete digits or characters while
using the dialling keys.
Silence the ringer temporarily
while the handset is ringing.
Delete the displayed entry while
in the directory, caller ID log or
redial list.
CHARGE light
On when the handset is charging.
Switch to tone dialing
temporarily during a call.
Dialing keys
Enter numbers or characters.
VOLUME/ /
Review the directory when the
phone is not in use.
Increase the listening volume
during a call or message playback.
Scroll up while in a menu, or in the
directory, caller ID log or redial list.
Move the cursor to the right when
entering numbers or names.
MENU/SELECT
Show the menu.
While in a menu, press to
select an item, or save an entry
or setting.
OFF/CANCEL
Hang up a call.
Silence the ringer temporarily
while the handset is ringing.
Press and hold to erase the
missed call indicator while the
phone is not in use.
Press to return to the previous
menu, or press and hold to
return to idle mode, without
making changes.
REDIAL/PAUSE
Press repeatedly to review the redial list.
Press and hold to insert a dialing pause
while entering numbers.
# (pound key)
Press repeatedly to show other
dialing options when reviewing
a caller ID log entry.
1/
Press repeatedly to add or
remove 1 in front of the caller ID
log entry before dialing or saving
it to the directory.
Press and hold for Voicemail
speed dial.
(speakerphone)
Make or answer a call using the
handset speakerphone.
During a call, press to switch between
the speakerphone and the handset.
/CELL
Make or answer a cell call.
Answer an incoming call when
you hear a call waiting alert.
Flashes quickly when there is an
incoming cell call.
Flashes slowly when a cell call is
on hold.