User's Manual

85
Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT conversation to an intercom call.
Using a cordless handset:
When your handset displays Press and hold [PTT] to talk, press
INTCOM.
Your handset displays Switch to Intercom? Press
SELECT to confirm.
If you have a one handset, your handset displays Calling other handset
or Calling base. The destination handset temporarily displays Push to
talk Ended and then Other handset is calling or Base is calling.
If you have more than one handset, your handset displays Calling
HANDSET Y (Y represents the destination handset number) or Calling
BASE 0. The destination handset temporarily displays Push to talk
Ended and then HANDSET X is calling (X represents the originating
handset number) or BASE 0 is calling.
On the destination handset, press
HOME/FLASH or /SPEAKER to
answer the intercom call. Both handsets now display Intercom.
To end the intercom call, press OFF/CANCEL, END or place the handset
in the telephone base or charger. Both handsets display Intercom ended.
Using the telephone base:
When your handset displays Press and hold [PTT] to talk, press
INTCOM.
The telephone base displays Switch to Intercom? Press
SELECT.
If you have a two-handset system, your handset displays Calling other
handset or Calling base. The destination handset temporarily displays
Push to talk Ended and then Other handset is calling or Base is calling.
If you have three or more handsets, the telephone base displays
Calling HANDSET Y (Y represents the destination handset number)
or Calling BASE 0. The destination handset temporarily displays
Push to talk Ended and then HANDSET X is calling (X represents
the originating handset number) or BASE 0 is calling.
On the destination handset, press
HOME/FLASH or /SPEAKER to
answer the intercom call. Both screens now display Intercom.
To end the intercom call, press CANCEL or
END on the telephone base.
Both handsets display Intercom ended.
1.
•
•
2.
3.
1.
•
•
2.
3.