User's Manual

80
Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
Press PTT when the handset is not in use. The
PUSH TO TALK menu displays.
Press
CID or DIR to highlight PTT On/Off, then
press
SELECT.
Press
CID or DIR to highlight On or Off, then press
SELECT to save. You hear a confirmation tone.
PTT to a single handset
Using a cordless handset:
You have two ways to begin a PTT call:
If you have one handset, press and hold PUSH TO TALK when the
handset is not in use.
-OR-
If you have more than one handset, press PUSH TO TALK when
the handset is not in use. Then use the dialing keys to enter a
handset number (0 for telephone base, 1-9 for handsets 1-9,
TONE
and 0 for handset 10, TONE and 1 for handset 11 or
TONE
and 2 for handset 12), or press CID or DIR to scroll to
the desired handset or the telephone base, then press
SELECT or
PUSH TO TALK to create the push-to-talk session.
Your handset displays Connecting to HANDSET X... or Connecting to
BASE 0... for a few seconds. When the connection is made, both your and
the destination handsets display Press and hold [PTT] to talk and beep
once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast
to the destination handset. While you are speaking, the handset displays
PTT To HANDSET X (X represents the destination handset number) or
PTT To BASE 0.
Release PUSH TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination handsets can respond (see Answer a PTT call
on page 84).
To end the PTT call, press OFF/CANCEL or END. The handset displays
Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
1.
2.
3.
1.
•
•
2.
3.
4.
5.
PUSH TO TALK
HANDSET B 3
Group
PTT On/Off
BACK SELECT
INCOMING PTT
3On
Off
BACK SELECT