User's Manual

ManualsBrandsVTech Telecommunications ManualsElectronics1.9GHz DECT Cordless Phone

Multiple handset use

Intercom

To mute while on an intercom call:

Press MUTE/DELETE on the handset or telephone base. Its screen displays

Microphone off for a few seconds.

To end an intercom call at the destination handset:

Press

OFF/CANCEL, END or place either handset back in the telephone

base or charger. Both screens display Intercom ended.

To end an intercom call at the telephone base:

Press END or CANCEL. Both screens display Intercom ended.

NOTES:

You can cancel the intercom call before it is answered by pressing

OFF/CANCEL or

END on your originating handset.

If you are calling all handsets, only the first handset to pick up can answer the

intercom call.

If the destination handset does not answer the intercom call within 100 seconds, is in

the directory or caller ID log, or is out of range, the originating handset displays No

answer. Try again. and returns to idle mode.

Using the telephone base:

Press MENU on the handset in idle mode.

Press CID

or DIR to highlight Intercom, then

press SELECT.

If you have one handset, the telephone base displays

Calling HANDSET. The handset rings and displays

Base is calling.

If you have

more than one handset, your handset

displays INTERCOM and a list of registered handsets.

Press

CID or DIR to select a destination

handset and then press SELECT. Your handset

displays Calling HANDSET X, Calling BASE 0 or

Calling all devices when you choose Group.

-OR-

Press 0 for BASE 0, 1-9 for HANDSET 1-9, TONE and 0 for

HANDSET 10,

TONE and 1 for HANDSET 11 or TONE and 2 for

HANDSET 12. Your handset displays Calling HANDSET X or Calling

BASE 0. The other handset rings and displays HANDSET X is calling.

-OR-

Press TONE and then # (pound key) to call all handsets.

The telephone base displays Calling HANDSET X. The destination

handset rings and displays BASE 0 is calling.

•

–

Answering sys