User's Manual

ManualsBrandsVTech Telecommunications ManualsElectronics1.9GHz DECT Cordless Phone

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets, or a

handset and the telephone base.

You can buy additional expansion handsets (AT&T model TL90071, sold

separately) for this telephone system. You can register up to 12 handsets to

the telephone base.

To initiate an intercom call:

Using a cordless handset:

Press MENU on the handset in idle mode.

Press CID

or DIR to highlight Intercom, then

press SELECT.

If you have one handset, your handset displays

Calling base. The destination handset rings and

displays HANDSET is calling.

If you have

more than one handset, your handset

displays INTERCOM and a list of registered handsets.

Press CID or DIR to select a destination handset

and then press SELECT. Your handset displays

Calling HANDSET X, Calling BASE 0 or Calling all

devices when you choose Group.

-OR-

Press 0 for BASE 0, 1-9 for HANDSET 1-9, TONE and 0 for

HANDSET 10,

TONE and 1 for HANDSET 11 or TONE and 2 for

HANDSET 12. Your handset displays Calling HANDSET X or Calling

BASE 0. The other handset rings and displays HANDSET X is calling.

-OR-

Press

TONE and then # (pound key) to call all handsets.

The destination handset(s)

or telephone base rings and displays

HANDSET X is calling, or HANDSET X is calling all when you choose

all handsets.

To answer an intercom call at the destination handset:

Press

HOME/FLASH or

/SPEAKER

. Both handsets show Intercom.

To silence an intercom call:

Press

OFF/CANCEL, MUTE/DELETE or SILENCE on the destination

handset. Its screen displays Ringer muted for a few seconds.

•

–

•

Answering sys