User's Manual

59
Telephone operation
Make, answer and end a call
Using the telephone base:
To make a cell call:
Press CELLULAR, then enter the telephone number.
Press DIAL.
To predial a cell call:
Enter the telephone number, then press
CELLULAR .
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls. If you have two cell phones
connected to the telephone base, the telephone system prompts you to select
a cell phone before you make a cell call.
To answer a cell call:
Press CELLULAR .
To end a cell call:
Press CELLULAR .
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone,
it disconnects from the telephone base.
If you do not want to answer the call, press
REJECT.
When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Press
CONNECT to connect
your cell phone to the telephone system. Refer to Bluetooth connection from idle
mode on page 26 and Connect/disconnect an active device on page 23.
Call waiting on the cell line
If you subscribe to call waiting service from your cell phone service provider,
you hear a beep if someone calls while you are already on a call.
Using a cordless handset:
Press
CELLULAR on the handset to put your current call on hold and
take the new call.
Press
CELLULAR on the handset at any time to switch back and forth
between calls.
-OR-
Press
SWAP to switch. To switch back, press OPTION. Press CID or DIR
to highlight Swap, then press SELECT.
Using the telephone base:
Press SWAP on the telephone base. The original call is put on hold and
you can take the new call.
Press OPTION on the telephone base.
Press CID or DIR to highlight
Swap.
Press SELECT to resume the original call. The other incoming cell
call is put on hold.
1.
2.
•
•
•
•
•
•
•
•
•
•
•