User's Manual

58
Telephone operation
Make, answer and end a call
Call waiting on home call
If you subscribe to call waiting service from your telephone service provider,
you hear a tone if someone calls while you are already on a call.
Press
HOME/FLASH on the handset, or press FLASH on the telephone
base to put your current call on hold and take the new call.
Press
HOME/FLASH on the handset, or press FLASH on the telephone
base at any time to switch back and forth between calls.
Make, answer or end a cell call
You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base, but only one cell phone can be used on a cell call at a time.
The
TL96271/TL96371/TL96471 can be used to make or answer calls on
the cell phone line.
Using a cordless handset:
To make a cell call:
Enter the telephone number, then press
CELLULAR.
-OR-
Press
CELLULAR.
Enter the telephone number, then press DIAL.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls. If you have two cell phones
connected to the telephone base, the telephone system prompts you to select
a cell phone before you make a cell call.
To answer a cell call:
Press
CELLULAR.
To end a cell call:
Press
OFF/CANCEL or put the handset in the charger.
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone,
it disconnects from the telephone base.
When you try to make a cell call but your cell phone is not connected to the base, the
cordless handset displays No cellular is ready for connection Press
CONNECT to
connect your cell phone to the telephone system. Refer to Bluetooth connection from
idle mode on page 26 and Connect/disconnect an active device on page 23.
•
•
•
1.
2.
•
•
•
•