User's Manual

54
Telephone settings
Telephone base settings
Cell area code
If you have downloaded a directory from your cell phone, you may need
to set your cell area code in order to dial a number from your downloaded
directory correctly.
Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your land lines.
To set the cell area code:
Press MENU on the telephone base in idle mode to
enter the main menu.
Press
CID or DIR to highlight Directory, then
press SELECT.
Press
CID or DIR to highlight a desired downloaded
directory, then press OPTION.
Press SELECT to choose Cell area code. The screen
displays Only for 7 digits dialing from Caller ID log.
Use the dialing keys to enter the desired cell area code.
Press MUTE/DELETE to erase a digit.
Press and hold
MUTE/DELETE to erase all digits.
Press
CID or DIR to move the cursor to the left or
right.
Press SET to save. The handset screen displays
Area code will not show in Caller ID log. You hear a
confirmation tone.
1.
2.
3.
4.
5.
•
•
•
6.
DIRECTORY
Home
Cell phone A
Cell phone B
OPTION REVIEW
Play messages
Answering sys
Directory
Caller ID log
BACK SELECT
CELL PHONE A
Cell area code
Last update
Remove DIR
BACK SET
CELL AREA CODE
Active devices
___
BACK SET