User's Manual

Telephone settings

Telephone base settings

Home area code

If you dial seven digits to make a local call (area code not required), enter

your area code

into the telephone as the home area code. When you receive

a call from within your home area code, the caller ID history only displays the

seven digits of the telephone number.

This feature makes it easy for you to place a call from the caller ID log. If you

dial 10 digits to make a local phone call, do not use this home area code

feature. If you do, you cannot place local calls from your caller ID log, as they

will have only seven digits.

To set the home area code:

Press MENU on the telephone base in idle mode to

enter the main menu.

Press

CID or DIR to highlight Directory, then

press SELECT.

Press OPTION to choose Home.

Press CID or DIR to highlight Home area code, then

press SELECT.

The screen displays Only for 7 digits dialing from

Caller ID log.

Use the dialing keys to enter the desired home

area code.

Press

DELETE/X to erase a digit.

Press and hold

DELETE/X to erase all digits.

Press

CID or DIR to move the cursor to the left or

right.

Press SET to save. The handset displays Area code will

not show in Caller ID log. You hear a confirmation tone.

NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to

make a local call (area code + telephone number), you will need to delete your home area

code. With the home area code displayed, press and hold

DELETE/X

, and then press SET.

The home area code is now restored to its default setting of _ _ _ (empty).

•

Play messages

Answering sys