User's Manual

Bluetooth

Bluetooth setup

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not

connected to any other Bluetooth device. Refer to your headset user's

manual to learn how to search for or add new Bluetooth devices.

To pair and connect a headset:

Press MENU on the telephone base in idle mode to

enter the main menu.

Press

CID or DIR to highlight Bluetooth, then press

SELECT

Press SELECT to choose Add device.

Press

CID or DIR to highlight Add headset, then

press SELECT. The screen displays

Please wait...

followed by If headset is connected to cell, please

disconnect it. Press NEXT.

If there is another headset already active, the screen

will show Only 1 headset in device list can be

ready for connection and prompt you to replace an

existing paired device (page 27).

When you already have two active devices, the

handset shows Only 2 devices can be ready for

connection. The telephone base will deactivate

another headset from active slot automatically.

Press NEXT. The screen displays Pls set headset to

discoverable mode, then press NEXT.

All devices that are connected to the telephone base

are temporarily disconnected.

The screen displays Searching for Bluetooth

headsets... Set your headset to discoverable mode

(refer to the user’s manual of your headset).

When the screen displays the found devices, press

CID or DIR to highlight your headset and then

press NEXT.

Enter the PIN of your headset. The PIN for most

Bluetooth devices is 0000 (refer to the user’s manual

of your headset). Then press NEXT.

•

BLUETOOTH

Add device

Device list

Download dir

BACK SELECT