User's Manual

8
Getting started
Wall mount installation
Plug the other end of the telephone line cord into the telephone wall jack.
Plug the large end of the base power adapter into an electrical outlet not
controlled by a wall switch.
4.
A DSL filter (not included) is
required if you have DSL
high-speed Internet service.
Align the holes on the wall mount bracket with the mounting studs of the
wall mounting plate and slide the bracket down until it locks securely into
place. If necessary, bundle the telephone line cord and power adapter cord
neatly with twist ties.
5.
DSL filter
DSL filter
Getting started
9
Wall mount installation
Wall mount to tabletop installation
To change the telephone base from wall mount installation to tabletop
installation, follow the steps below.
Unplug the large end of the base power adapter from the electrical outlet.
If the telephone line cord and power adapter cord are bundled, untie
them first. Slide the wall mount bracket up and remove it from the wall
mounting plate. Unplug the end of the telephone line cord from the
telephone wall jack.
1.
2.
Lift the telephone base up to detach it from the wall mount bracket.3.
Refer to Telephone base and charger installation on page 4 to install the
telephone base.
4.