User's Manual

Getting started
5
Battery installation and charging
Battery installation
Install the battery as shown below.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,
visit our website at
www.telephones.att.com or call 1 [phone].
In Canada, dial 1 [phone].
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
1. Insert the supplied battery
with the label this side up
facing up as indicated.
2. Align the cover flat
against the battery
compartment, then slide
it upwards until it clicks
into place.
3.
Charge the handset by placing it face up
in the telephone base or charger. The
charger light is on when charging.
4.
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow the
instructions above to install and charge the
new battery.
CHARGE light