User's Manual

32
Multiple handset use
Press on the headset. The originating handset displays Intercom.
To turn off the microphone during an intercom call:
Press MUTE/
DELETE on the originating or destination handset. The handset
screen displays Muted for a few seconds and MUTE appears until the
mute function is turned off. Press MUTE/DELETE again to resume the
conversation.
Press MUTE/FLASH on the headset. The headset announces, “Mute on.”
The headset beeps every 30 seconds until the mute function is turned off.
Press MUTE/FLASH again to resume the conversation.
To end the intercom call:
Presses OFF/
CANCEL or places the handset in the telephone base or
charger. Both handsets display Intercom ended.
Press or place the headset in the telephone base, the originating handset
displays Intercom ended.
Headsets cannot make intercom calls, only answer them.
You can cancel the intercom call before it is answered by pressing OFF/
CANCEL.
If the other handset does not answer the intercom call within 100 seconds, or
if it is accessing the answering system, is out of range, or has no power, your
handset displays No answer. Try again and returns to idle mode.
Only one intercom call can be established with two handsets or one handset
and one headset at a time.
•
•
•
•
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there will be an
alert tone.
To answer the call, press /FLASH on the handset or press and hold
MUTE/FLASH for two seconds on the headset. The intercom call ends
automatically.
To end the intercom call without answering the incoming call, press
OFF/
CANCEL on the handset or press on the headset. The telephone
continues to ring.
•
3.
•
•
4.
•
•
•
•