User's Manual

Telephone operation
27
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press on the handset.
Use the dialing keys to enter the number you wish to dial. The telephone
sends touch-tone signals. The telephone automatically returns to pulse dialing
mode after you end the call.
Find handset/headset
The find handset feature helps you find misplaced handsets.
To start the paging tone:
Press
/FIND HANDSET on the telephone base. All idle
handsets ring, the handset screens display ** Paging **
and the light on the headset flashes in blue.
To end the paging tone:
To end the paging tone, press
/FLASH, /SPEAKER,
any dialing key (0-9, #, ) on the handset or press
on the headset or press /FIND HANDSET on the telephone base.
Press OFF/CANCEL or MUTE/DELETE to temporarily turn off the paging tone on
the handset. Its screen shows Ringer muted and
.
All registered handsets rings when being paged even if the ringer volume is set
to off.
•
•
1.
2.
•
•