User's Manual

Handset settings

Answering system settings

In the answering system setup menu, you can change the settings for call

screening, number of rings, remote access code and message alert tone and

recording time.

Call screening

The call screening feature lets you listen at the telephone base to a caller

leaving a message. If you turn call screening on, you can press SCREEN on

a handset to hear the incoming message. While monitoring an incoming

message, you can answer the call by pressing

HOME/FLASH or /SPEAKER

on the handset

To change the settings:

Press MENU on the handset in idle mode to enter the

main menu.

Use CID or DIR to scroll to Answering sys, then

press SELECT.

Use

CID or DIR to scroll to Ans sys setup, then

press SELECT twice to select Call screening.

Press CID or DIR to choose between On and Off.,

then press SET to save. You hear a confirmation tone.

NOTE: For more information on call screening, see page 83.

ANS SYS SETUP

Call screening

# of rings

Remote code

BACK SELECT

CALL SCREENING

3On

Off

BACK SET