User's Manual

59
Multiple handset use
Push-to-talk (PTT)
End a PTT call
For a one-to-one PTT call, both the originating and destination handsets
can end the PTT call.
For one-to-all PTT, the initiating handset can end the PTT call for all
handsets on the PTT call. If any one of the destination handsets leaves the
PTT call, the call continues until all participants or the initiator hangs up.
To end or leave PTT:
Press
OFF/CANCEL or place the handset in the telephone base or charger.
The handset displays Push to talk Ended.
NOTES: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
Answer an incoming call during PTT
When you receive an incoming outside call during PTT, there is a call waiting
tone. The caller ID is displayed with PTT screen alternately.
During a one-to-one PTT, press
HOME/FLASH or CELLULAR on the
originating or destination handset. The PTT call ends automatically and the
outside call is answered.
During a one-to-all PTT, press
HOME/FLASH or CELLULAR on the
originating handset. The PTT call ends automatically and the outside call is
answered.
During a one-to-all PTT, press HOME/FLASH or CELLULAR on any one
of the destination handsets and that handset answers the outside call. The
PTT call continues for the rest of the PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL. The telephone continues to ring.
Make an outgoing call during PTT
During a one-to-one PTT call, press HOME/FLASH or CELLULAR to get
a dial tone. The PTT call ends automatically.
During a one-to-all PTT call, press HOME/FLASH or CELLULAR on the
originating handset. The PTT call ends automatically and you get a dial tone.
During a one-to-all PTT call, press HOME/FLASH or CELLULAR on any
one of the destination handsets and that handset gets a dial tone. The PTT
call continues for the rest of the PTT participants.
•
•
•
•
•
•
•
•
•