User's Manual

56
Multiple handset use
Push-to-talk (PTT)
PTT to a single handset
You have two ways to begin a PTT call:
If you have two handsets, press and hold PUSH TO TALK when handset
is not in use.
If you have three or more handsets, press PUSH TO TALK when the
handset is not in use. Then use the dialing keys to enter a handset
number (1-9 for handsets 1-9, and 0 for handset 10, and 1 for handset
11 or and 2 for handset 12), or press
CID or DIR to scroll to the
desired handset then press
SELECT. Press SELECT or PUSH TO TALK to
create the push-to-talk session.
-OR-
Use the dialing keys to enter the destination handset number.
If you have two handsets, press and hold PUSH TO TALK when handset is
not in use to call the other handset.
Your handset displays Connecting to HANDSET X... for a few seconds.
When the connection is made, both your and the destination handsets
display Press and hold [PTT] to talk and beep once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset. While you are speaking, the handset displays PTT
To HANDSET X (X represents the destination handset number).
Release PUSH TO TALK after speaking. All handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to
continue speaking or the destination handsets can respond (see Answer a
PTT call on)
To end the PTT call, press
OFF/CANCEL or END. The handset displays
Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTES: After PUSH TO TALK is released, the PTT call remains open for a short time. If
no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
1.
•
•
3.
4.
5.
6.