User's Manual

22
Bluetooth
DEVICE LIST
D1:Headset A
D2:Cell Phone A
Cell Phone B
BACK OPTION
1
Bluetooth setup
Replace an active device
If you already have two active devices on the device list and
you want to activate a different device, you must deactivate
one of the two active device.
To replace an active device:
Press MENU on the handset when it is not in use.
Press
CID or DIR to highlight Bluetooth, then
press SELECT.
Press
CID or DIR to highlight Device list, then
press SELECT.
Press CID or DIR to highlight the device you want to
activate, without a prefix D1: or D2: ,then press OPTION.
Press CID or DIR to highlight Connect, then press
SELECT. The handset displays Only 2 devices can be ready
for connection and then a list of devices for deactivation.
Press CID or DIR to highlight the device to be
deactivated, then press SELECT. The handset displays
Cell Phone A is deactivated you hear a confirmation
tone. The screen displays then Connecting Cell Phone B
to the base...
Depending on your cell phone settings, you may need to
press a key on your cell phone to confirm the connection.
When the new device is successfully activated and
connected, the handset displays Device connected. You
hear a confirmation tone.
Bluetooth connection from idle mode
When you have active devices that are not connected,
CONNECT appears on the idle handset. Press CONNECT to
start connecting an active device. When there are two active
devices, the handset will prompt you to choose one before
connection.
1.
2.
3.
4.
5.
6.
7.
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
Connecting
Cell Phone B
to the base...
HANDSET
--:-- --/--
CONNECT MENU
1
1
DEACTIVATE
D1:Headset A
D2:Cell Phone A
BACK SELECT
1
DEVICE LIST
D1:Cell Phone B
D2:Cell Phone A
Headset A
BACK SELECT
1