User's Manual

18
Bluetooth
Bluetooth setup
The screen will display Adding Headset A to device list...
when the base is connecting to your headset.
When a device is successfully connected, the handset
displays Headset A is added and connected to base
and the corresponding status icon (
1 or 2). You hear
a confirmation tone. The corresponding light on the
telephone base (DEVICE 1 or DEVICE 2) turns on.
NOTES:
The pairing process may take up to one minute. If the pairing
process fails, try again.
If you put the handset back in the telephone base or charger while pairing, the process
discontinues and the handset returns to idle mode.
Auto connection
An active device may be disconnected from the telephone base when:
The Bluetooth feature of your cell is turned off.
The power of your device is turned off.
Your Bluetooth device are not is not within range of the telephone base.
When the Bluetooth or power on the device is turned on or it moves within
range of the base, the base will try to reconnect to the Bluetooth device. If
you disconnect the device through the device list, the base will not attempt to
reconnect unless your device is moved out of range and back in range again.
9.
10.
1.
2.
•
•
•
Adding
Headset A
to device
list...
Headset A
is added
and connected
to base.
1