User's Manual

Bluetooth

Bluetooth setup

Your cell phone may require a passcode. In this case the

handset screen displays Check cellular. ENTER PASS

CODE. Enter the cell phone passcode into the handset

and press SET to save.

Enter the PIN of the telephone base (the default PIN

is 0000) into your cell phone to continue the pairing

process. The handset displays Adding Cell Phone A to

device list...

When a device is successfully connected, the handset

displays Cell Phone A is added and connected to base.

You hear a confirmation tone. The corresponding status icon (

1 or 2)

displays. The corresponding device light on the telephone base (DEVICE 1

or DEVICE 2) turns on.

NOTES:

The pairing process may take up to one minute. If the pairing process fails, try again.

If you put the handset back in the telephone base or charger while pairing, the process

is cancelled and the handset returns to idle mode.

Adding

Cell Phone A

to device

list...

Cell Phone A

is added

and connected

to base.