User's Manual

10
Getting started
Battery installation
Install the battery as shown below. After installing the battery,
you may be able to make and receive short calls. For optimal
performance, charge the headset battery for at least six hours
before use. When not in use, recharge the headset by returning it
to the headset base.
1. Press in on both sides of the
battery compartment cover and
lift the cover up and off.
2. Insert the battery into the battery
compartment.
3. Push the battery plug into the
connector inside the compartment
and lay the wires flat on top of
the battery.
4. Insert the tab on the bottom of
the battery cover into the battery
compartment. Press down gently
on the battery cover until it snaps
into place.
Battery Pac
k
BT19154
5
3.7V 260mAh Li-ion
Polyme
r
WA
RN
I
NG: DO NOT BURN
OR DISASSEMBLE OR
PUNCTURE BA
TTERIE
S
MADE IN CHI
N
A
NOTE: Remove the ear hook from the headset (see page 14) before battery
replacement.