User's Manual

www.vtechphones.com
9
Basic operation
Telephone settings
Telephone settings
Dial mode
If you have touch tone service, the telephone is ready for use as soon as the
battery is charged. If you have pulse (rotary) service, you will need to change
the dial mode.
Press PROG when the handset is in idle mode.
Press
or until the screen displays DIAL MODE: and the current setting.
Press SELECT. 6JGEWTTGPVUGVVKPIƀCUJGU
Press
or to select TONE or PULSE.
Press SELECTVQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Home area code
If you dial your local calls using only seven digits (no area code required), program
your home area code, following the steps below. By programming your home area
code, caller ID will display only the phone number without area code when you
receive calls from callers in your local area.
Press PROG when the handset is in idle mode.
Press
or until the screen displays HOME AREA CODE.
Press SELECT. The stored area code is displayed with the first digit
ƀCUJKPI
Use the dial key pad to enter the desired home area code.
Press SELECTVQEQPſTO;QWYKNNJGCTCEQPſTOCVKQPVQPG
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.