Quick start guide DAL75011/DAL75021/DAL75111/ DAL75121/DAL75211/DAL75221/ DAL75311/DAL75321/DAL75411/ DAL75421 DECT 6.
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information section on pages 1-3 of this manual. Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base. Save your sales receipt and original packaging in case it is necessary to return your telephone for warranty service. For customer service, please visit our website at https://telephones.att.com or call 1 (800) 222-3111.
Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information f f f f f f f f f Read and understand all instructions in the user’s manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm.
Important safety information f CAUTIONS: Use only the power adapter provided with this product. To obtain a replacement, visit our website at https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. f Use only the supplied rechargeable batteries or replacement batteries (model BT262661). To order, visit our website at https://telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Important safety information The RBRC Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickelmetal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. You may call 1-800-8-BATTERY® for locations accepting spent Ni-MH batteries. The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of Call2recycle, Inc.
Install Telephone base f f Notes: Plug one end of the telephone line cord into a telephone jack or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. Charger Caution: Use only the power adapter(s) provided with this product. To obtain a replacement, visit our website at https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Install Battery Install the battery, as shown below. Charge your handset(s) before initial use. The battery is fully charged after 11 hours of continuous charging. The CHARGE light on the top of the handset is on during charging. Caution: Use only the supplied rechargeable battery or replacement battery (model BT262661).
Handset overview 1 8 2 9 3 10 4 5 11 6 12 7 13 Handset 1 CHARGE light Ì On when the handset is charging in the telephone base or charger. 2 CELL Ì Ì Press to make or answer a cell call. During a call, press to answer an incoming cell call when you hear a call waiting alert. 3 HOME/ FLASH Ì Ì Press to make or answer a home call. During a call, press to answer an incoming home call when you receive a call waiting alert.
Handset overview 7 MUTE/ DELETE Ì Ì Ì Ì Ì Ì Ì 8 VOLUME p Ì Press to show phonebook entries when the handset is not in use. Ì Ì Press to scroll up while in menus. While entering names or numbers, press to move the cursor to the right. Press to increase the listening volume when on a call, or to increase the message playback volume. Ì VOLUME q During a call, press to mute the microphone. When the handset is ringing, press to mute the ringer temporarily.
Handset / Telephone base overview 12 13 CALL BLOCK/ VOICE Ì REDIAL/ PAUSE Ì Ì Ì Ì When the telephone is ringing, press to block the incoming home call or cell call. When on a home call or cell call, press to block the call. While connected to one or two cell phones, press to activate the voice-controlled application of one of the connected cell phones. Press repeatedly to view the last 10 numbers dialed. While entering numbers, press and hold to insert a dialing pause.
Telephone base overview 1 2 3 4 5 6 7 Telephone base 1 Message window 2 FIND HS 3 VOLUME Ì Press to page all handsets. Ì When the telephone is idle, press to increase the telephone base ringer volume. During call screening or message playback, press to increase the listening volume Ì VOLUME Ì Ì 4 X When the telephone is idle, press to decrease the telephone base ringer volume. During call screening or message playback, press to decrease the listening volume.
Telephone base overview 5 CELL 1 Ì Ì Ì Ì CELL 2 Ì Ì Ì Ì 6 IN USE light Ì Ì 7 Ì Light on when the telephone base is paired and connected with a Bluetooth device. Light flashes when the telephone base is in discoverable mode. Press to connect the paired cell Bluetooth device. Press and hold to add or replace a Bluetooth device. Light on when the telephone base is paired and connected with a Bluetooth device. Light flashes when the telephone base is in discoverable mode.
Initial basic settings After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. To skip setting the date and time, press OFF/CANCEL on the handset. Voice guide to set Smart call blocker and answering system After the date and time setting is done or skipped, the handset will prompt if you want to set Smart call blocker. Press MENU/SELECT to start the Smart call blocker setup via voice guide. To skip the setup, press OFF/CANCEL twice.
Initial basic settings Basic answering system setup via voice guide You can follow the voice guide to record your own announcement, set the number of rings and set the message alert tone. Using a cordless handset: 1. Press MENU -> / -> Answering sys -> SELECT. 2. / -> Voice guide -> SELECT. 3. Set up the answering system by inputting the designated numbers, as instructed.
Initial basic settings Record your own announcement Your outgoing announcement plays when calls are answered by the answering system. You can use the preset announcement to answer calls, or replace it with your own recorded announcement. Using a cordless handset: 1. MENU -> / -> Answering sys -> SELECT. 2. SELECT to select Announcement. 3. Press 7 to record. 4. Speak towards the handset to record your announcement and press 5 to end recording and save it.
Initial basic settings LCD language Using a cordless handset: 1. MENU -> / -> Settings -> SELECT. 2. SELECT again to select LCD language. 3. / to choose English, Français or Español -> SELECT. Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without going through the French or Spanish menus.
Phonebook The phonebook can store up to 1,000 entries, which are shared by all system devices. Operation Adding an entry in the phonebook Searching/dialing an entry Adding a call log entry in the phonebook Steps 1. 2. 3. 4. MENU -> / -> Phonebook -> SELECT. SELECT to select Add new entry. Enter a telephone number up to 30 digits -> SELECT. Enter a name up to 15 characters -> SELECT. 1. Press on the handset in idle mode -> / to select the desired phonebook entry. 2.
® Bluetooth Connect to CellTM app If you are using Bluetooth-enabled cell phones with Android® OS 2.3 or above, you may also download the Connect to Cell™ application (consists of Caller ID manager and Alerts manager) using the Google Play® Store app to extend the flexibility of your DAL75011/DAL75021/ DAL75111/DAL75121/DAL75211/DAL75221/DAL75311/DAL75321/ DAL75411/DAL75421. Scan the QR code on the right to download the application.
® Bluetooth To activate remote voice control: 1. Press VOICE. -ORIf you have two connected cell phones -> / to select a device. 2. When the handset plays the confirmation tone, speak toward the handset, and then wait for feedback. Make reply to the voice app’s feedback, if necessary. 3. Press CANCEL to exit. Refer to the online Complete user’s manual for a list of troubleshooting tips on using Remote voice control feature.
Smart call blocker *§ If you have subscribed to caller ID service, then you can use the Smart call blocker feature to screen incoming calls. Not familiar with Smart call blocker? Want to know more? Smart call blocker is an effective call screening tool, which allows your phone system to screen ALL home calls. The screening feature of Smart call blocker is applicable to home calls only. All incoming cell calls will get through and ring. If you want to block a cell call, add the number to the block list.
Smart call blocker Overview Unknown callers Family and friends Schools and pharmacies Robocalls and telemarketers Smart call blocker Search and screen based on caller ID Welcome calls Unwelcome calls Robocalls and telemarketing calls: - Numbers in your block list Family and friends with numbers: - In Phonebook - In Allow list Unknown calls (for home calls only) 1. Calls without numbers: - Calls without caller ID 2.
Smart call blocker Set up Phonebook Enter and save telephone numbers of frequently called businesses, family members and friends, so that when they call, your telephone rings without having to go through the screening process. Add contact to phonebook 1. MENU -> / -> Phonebook -> SELECT. 2. Press SELECT again to choose Add new entry -> SELECT. 3. Enter a telephone number (up to 30 digits) -> SELECT. 4. Enter a name (up to 15 characters) -> SELECT. To add another contact, repeat from step 2.
Smart call blocker Star name list ^ Add caller names to your star name list to allow their calls to get through to you without having to go through the screening process. Add a star name list entry 1. CALL BLOCK -> / -> Star name list -> SELECT. 2. / -> Add new entry -> SELECT. 3. Press SELECT to save the name. To add another entry in the star name list, repeat from step 2.
Smart call blocker Scenarios of Smart call blocker configuration Scenarios Voice guide setup I want to screen any home calls from numbers not saved in the Phonebook, Allow list or Star name list. Press 1 when prompted Set profile Screen unknown Screen unknown ECO (1) I want to allow all calls except the people on the Block list only. Press 2 when prompted Default settings Allow unknown Allow unknown ECO (2) I want to screen robocalls only.
Smart call blocker Set Smart call blocker via voice guide After installing your phone or power resume after outage, the voice guide will provide you a quick and easy to set Date and Time, to configure Smart call blocker, and to set up Answering system. After the date and time setting is done or skipped, the base will prompt if you want to set Smart call blocker. Press SELECT to start the Smart call blocker setup via voice guide.
Smart call blocker Screen all calls except welcome calls (1) Call from John “John” No caller ID Uncategorized calls # Ask caller to announce his or her name, then press # Telephone ringing Ask you to select Answer call Answer call and save the number to the Allow list Block Caller Smart call blocker Search and screen based on caller ID Smart call blocker To answering system Caller No response Call rejected 1. Press CALL BLOCK. 2. / to choose Set profile ->SELECT. 3.
Smart call blocker Block calls on the block list only (2) - Default settings In your block list Call rejected Robocalls Telemarketers Smart call blocker Search and screen based on caller ID No caller ID Uncategorized calls Telephone ringing Caller 1. Press CALL BLOCK. 2. / to choose Set profile ->SELECT. 3. / to select Allow unknown ->SELECT.
Smart call blocker Forward all unknown calls to answering system (4) No caller ID Uncategorized calls Caller Smart call blocker Call forwarded to answering system Search and screen based on caller ID 1. Press CALL BLOCK. 2. / to choose Set profile ->SELECT. 3. / to select UnknownToAns.S ->SELECT. Block all unknown calls (5) No caller ID Uncategorized calls Caller Smart call blocker Search and screen based on caller ID 1. Press CALL BLOCK. 2. / to choose Set profile ->SELECT. 3.
Smart call blocker Add numbers from caller ID log to allow list, block list and star name list Adding CID log entry to allow list 1. CID -> / -> SELECT to select the desired entry. 2. / -> To Allow list. 3. Edit the telephone number if needed -> SELECT. 4. Edit the name if needed -> SELECT. Adding CID log entry to block list 1. CID -> / -> SELECT to select the desired entry. 2. / -> To Block list. 3. Edit the telephone number if needed -> SELECT. 4. Edit the name if needed -> SELECT.
Answering system About answering system and voicemail Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail. To listen to messages recorded on the built-in answering system, refer to the Message playback section; to listen to voicemail, contact your telephone service provider for more information.
Answering system Turn answering system on or off The answering system must be turned on to answer and record messages. Using a cordless handset: 1. MENU -> / -> Answering sys -> SELECT. 2. / -> Answer on/off -> SELECT. 3. / to choose On or Off-> SELECT. When the answering system is on, the handset shows ANS ON. Using the telephone base: f Press to turn the answering system on or off. If the answering system is turned on, it announces, “Calls will be answered.
Answering system Message playback Using the telephone base: Ì Press when the telephone base is in idle mode. Using a cordless handset: Ì Press MENU then SELECT when the handset is in idle mode.
For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation.
For C-UL compliance f f f f Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) du guide d’utilisation. Si vous ne pouvez pas régler le problème, ou si le produit est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 37-39. N’ouvrez pas ce produit, sauf tel qu’indiqué dans le guide d’utilisation. L’ouverture du produit ou le remontage inadéquat pourrait vous exposer à des tensions dangereuses ou autres dangers.
For C-UL compliance Spécifiquement en rapport avec les téléphones sans fil f f f f f Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil.
For C-UL compliance Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme.
FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
Industry Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Privacy of communications may not be ensured when using this telephone.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.
3. How long is the limited warranty period? The limited warranty period for SynJ® and Syn248® products is TWO (2) YEARS from the date of purchase, while all other products limited warranty period is ONE (1) YEAR from the date of purchase.
2. Include “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address and telephone number. 7. Other limitations This warranty is the complete and exclusive agreement between you and Advanced American Telephones. It supersedes all other written or oral communications related to this Product. Advanced American Telephones provides no other warranties for this Product.
Technical specifications RF frequency band 1921.536MHz — 1928.448MHz Channels 5 Telephone base voltage (AC voltage, 60Hz) 96 — 129 Vrms Telephone base voltage (DC adapter output) 6VDC @400mA Handset voltage 2 x 1.2 VDC, AAA x 2, Ni-MH Charger voltage (AC adapter output) 6VDC @400mA Operating times* Talk time (handset): up to 10 hours Standby: up to 5 days * Operating times vary depending on your actual use and the age of the battery.
