User's Manual

Touch a nd learn!
Touch a nd learn!
Read our complete warranty policy online at
leapfrog.com/warranty.
Visit our website for more information about
our products, downloads, resources and more.
leapfrog.com
leapfrog.com
LF915HD
LF915-2HD
UL STD.
62368-1
CERTIFIED TO
CSA STD.
C22.2 NO.62368-1
CONFORMS TO
5” High Definition
5” High Definition
Pan & Tilt Monitor
Pan & Tilt Monitor
Need help?
Visit leapfrog.com/support
Parent Guide
This guide contains important information.
Please keep it for future reference.
12
13
Get Started
1. Connect the Baby Monitor
Charge the Parent Viewer battery before use
When you connect and turn on the Parent Viewer, the battery charges automatically.
Notes:
• Before using the baby monitor for the first time, charge the Parent Viewer battery for 12 hours.
When the Parent Viewer battery is fully charged, the battery icon becomes solid
.
• It takes longer to charge the battery when the Parent Viewer is turned on. To shorten the charging
time, turn the Parent Viewer off while charging.
• The standby time varies depending on the Baby Unit sensitivity levels you set, your actual usage
time and the age of the battery.
The battery icon on the screen indicates the battery status (see the following table).
Battery Indicators Battery Status Action
The screen displays
.
The
light flashes.
The battery has very little
power left and may only be
used for a short time.
Charge without interruption
(about 30 minutes).
The battery icon becomes
solid
.
The battery is fully charged.
To keep the battery charged,
connect it to AC power when
not in use.
2. Power On or Off the Baby Monitor
1. Slide the On/Off switch to ON to power
on your Baby Unit.
2. After the Parent Viewer is fully charged,
press and hold
until the welcome screen
appears.
4. Positioning the Baby Monitor
1. 4.
2.
Note:
• To avoid interference from other electronic
devices, place your baby monitor at least 3
feet (1 meter) away from devices such as
wireless routers, microwaves, cell phones
and computers.
3.
Caution:
• The default volume of your Parent Viewer
is level 3, and the maximum volume is
level 5. If you experience a high-pitched
screeching noise from your baby monitor
while positioning:
- Make sure your Baby Unit and Parent Viewer
are more than 3 feet (1 meter) apart, OR
- Lower the volume of your Parent Viewer.
Important Safety Instructions
The applied nameplate is located at the bottom of the Baby Unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock
and injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION: Do not install the Baby Unit at a height above 2 meters.
4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s
responsibility. This product could cease operating, and therefore you should not assume it will continue working
properly for any given period of time. Further, this is not a medical device and should not be used as such. This product
is intended to assist you in supervising your baby.
5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub
or swimming pool, or in a wet basement or shower.
6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the
Parent Viewer. The battery cannot be subjected to high or low extreme temperature and low air pressure at high
altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or
cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low
air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to
the information in The RBRC seal.
7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the
product.
Power adapter information:
Baby Unit output: Output: 5V DC 1.5A; VTech Telecommunications Ltd.; Model: VT07EUS05150
Parent Viewer output: Output: 5V DC 2A; VTech Telecommunications Ltd.; Model: VT07EUS05200
Rechargeable battery information:
Zhuhai Great Power Energy Co., Ltd.; Lithium battery, 3.7V 5000mAh; Model: GSP806090-5Ah-3.7V-1S1P
8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
10. Unplug this product from the wall outlet before cleaning.
11. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not cut off the power adapters to replace
them with other plugs, as this causes a hazardous situation.
12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or
crimped.
13. This product should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply in your home, consult your dealer or local power company.
14. Do not overload wall outlets or use an extension cord.
15. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
16. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the
back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must
not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be
placed near or over a radiator or heat register.
17. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points
or create a short circuit. Never spill liquid of any kind on the product.
18. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility.
Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
19. You should test the sound reception every time you turn on the units or move one of the components.
20. Periodically examine all components for damage.
21. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby
monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not
use it for some time.
22. Children should be supervised to ensure that they do not play with the product.
23. The product is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 32°F and 104°F.
2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as bright sunshine or fire.
4.
Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the
reach of children (more than 3 ft (0.9m) away). Do not remove this tag.
5. Never place the Baby Unit(s) inside the baby’s crib or playpen. Never cover the Baby Unit(s) or Parent Viewer with
anything such as a towel or a blanket.
6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away
from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors,
televisions, personal computers, kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the pacemaker.
• Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This LeapFrog product complies with all standards regarding electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available
today.
What’s Included
Key Features
Technical Specifications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency
Baby Unit: 2406-2475MHz
Parent Viewer: 2406-2475MHz
Channels 24
LCD
5’’ Color LCD
(IPS 1280x720 pixels)
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range
may vary according to environmental conditions at the time of use.
Power requirements
Parent Viewer: 3.7V 5000mAh Lithium-ion battery
Baby Unit power adapter: Output: 5V DC @ 1.5A
Parent Viewer power adapter: Output: 5V DC @ 2A
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
Basic Operation - Parent Viewer
Adjust Parent Viewer’s speaker volume
1. Press
to open the volume adjustment
bar.
2. Press
to increase the speaker volume
and
to decrease the speaker volume.
Talk to your baby via the Baby Unit
1. Press and hold the
key.
2. When the
icon displays on the screen,
speak to your Parent Viewer. Your voice is
transmitted to the Baby Unit.
3. When finished talking, release the
key
and hear your baby again.
Zoom
Press
to zoom in or out. The zoom
sequence is
1x
,
2x
,
4x
, then
8x
.
Turn on/off the Parent Viewer screen
You can turn on or off the Parent Viewer
screen without powering off the Parent Viewer.
You will still be able to hear sounds from the
Baby Unit.
• Press
on the Parent Viewer to turn off
the screen.
• Press any key on the Parent Viewer to turn
on the screen again.
Long press
9N[ZZ
OTMJU
S
T


Use the menu
Press
to enter the menu, choose a menu
item, or save a setting. You can use the Parent
Viewer for advanced settings or operations,
such as to play or stop the Baby Unit’s lullaby,
or to adjust the Baby Unit sound sensitivity.
While in the menu:
• Press
, ,
,
or
to scroll among the
menu options.
• Press
to select an item, or to save a
setting.
• Press
/
to return to the live video.
• Press
to go to the Help & Info page.
2
6°C
Monitoring mode
Exit
Selec
t
1
2
2
2
1
1
1
He
lp
50
Overview - Parent Viewer
Overview - Baby Unit
Parent Unit Icons
Main Menu Icons
Monitoring mode (For LF915-2HD only)
1
• Baby unit 1 in Single mode
2
• Baby unit 2 in Single mode
1
2
• Split mode
• Patrol mode
Night light
• Turn On/Off night light.
• Select Auto Brightness
mode (
or
)
• Adjust the fixed level night
light brightness.
Lullaby
• Stop melody playing.
• Play all melodies.
• View all Songs and play one of the five
melodies and five soothing sounds.
• Lullaby Timer
Set a timer to stop playing melodies after
15, 30, or 60 minutes, or let them play
non-stop.
Detection
Sound
• Select sound Sensitivity level.
• Turn on/off Sound Detection Alert.
• Turn on/off Auto Wake Up function.
(See Sound Detection and Auto Wake Up
sections to learn more)
Detection (continued)
Motion
• Turn on/off Motion Alert.
• Select motion Sensitivity level.
(See Motion Detection section to learn more)
Temperature
• Turn on/off Temperature Alert.
When you turn it on, the parent unit beeps
whenever the room temperature detected
by the baby unit falls outside the set
temperature range.
• Select the Minimum temperature of the
temperature alert range.
• Select Maximum temperature of the
temperature alert range.
• Select temperature Format.
Change the temperature display format to
Fahrenheit
(
o
F) or Celsius (
o
C ).
LCD settings
• Adjust parent unit screen Brightness.
• Turn on/off Dim Mode.
(See Dim Mode section to learn more)
Camera settings
• Turn on/off Status LED indicator.
When you turn it on, the POWER LED light
on the baby unit to turn on/off or flash to
indicate the camera’s conditions.
• Adjust the baby unit’s speaker Volume.
General settings
• Turn on/off Low Battery Alert Tone.
When you turn it on, the parent unit beeps
when the battery is low.
• Turn on/off No Link Alert Tone.
When you turn it on, the parent unit beeps
when the link between the parent unit and
the baby unit is lost.
• Add Baby Unit
• Remove Baby Unit
1 set for LF915HD
2 sets for LF915-2HD
x 2
x 2
Parent Guide
Color and B&W
Automatic Night Vision
Thanks to the latest starlight
sensor and noise suppression
technology, you can check in on
your baby 24/7 with the finest
clarity. Night vision is no longer
just black-and-white, you can
choose to see your baby in color
at night!
Humidity and
Temperature Sensor
Rest assured of the environment
your baby is in with the
built-in real-time temperature
and humidity sensor. It lets you
know when the room is outside
a comfortable temperature and
humidity range.
Lullabies and
Soothing Sounds
Comforting and engaging your
baby can be done easily and
from a distance. Choose from 5
lullabies and 5 soothing sounds
to help lull your baby back to
sleep.
Pan, Tilt, and Zoom
Watch your curious little ones
closely as they wiggle and move
around in bed. Get a 360-degree
panoramic view, see as many as
80 degrees up and down, and
zoom up to 8x to spot more
details with ease.
Notes:
• The rechargeable battery in the Parent Viewer is built-in.
• Use only the power adapters supplied with this product.
• Make sure the Parent Viewer and the Baby Unit are not connected to the switch controlled electric outlets.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold
the weight of the Parent Viewer and the Baby Unit, so do not connect them to any ceiling, under-the-table, or cabinet
outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the Parent Viewer, the Baby Unit and the power adapter cords are out of reach of children.
• To maintain compliance with the FCC’s RF exposure guidelines, place the Baby Unit at least 20cm from nearby persons.
3. Status Check
Once your Baby Unit and Parent Viewer are
powered on, your Parent Viewer displays image
from the Baby Unit, and the
LINK LED light
turns on. The Baby Unit’s POWER LED light also
turns on.
1
Link LED light
• On when the Parent Viewer
is linked to the Baby Unit.
• Flashes when the link to the
Baby Unit is lost.
2
Battery LED light
3
Night Mode quick set key
• Select black-and-white or
color night vision viewing
mode.
• Adjust night light
brightness.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
5
8
4
9
6
7
11
10
1 Light sensor
2 Camera
3 Infrared LEDs
4 Microphone
5 Night light
6
Night light control key
• Press to turn the night light on or off.
• Press and hold to adjust night light
brightness.
7 Speaker
Night Light
Need some additional lighting
near your baby for those
bedtime stories? The built-in
night light on the baby monitor
can help with that. You can
control the night light directly on
the Baby Unit, or remotely from
the Parent Viewer.
Motion and Sound Sensor
With adjustable alerts on noise
or motion detected from the
baby monitor, give yourself a
peace of mind with an extra set
of eyes.
> 3ft (1m)
< 3ft (1m)
> 3ft (1m)
7
0
2
5
.
5
°C
7
0
2
5
.
5
°C
8 POWER LED Light
9 On / Off switch
10 Temperature sensor
• Position the sensor horizontally for
optimal usage.
11 Power jack
12 Wall mount holes
13 PAIR / Reset key
• The Parent Viewer and Baby Unit(s)
provided are already paired.
4
Arrow Keys
5
Menu / Select
6
Talk
/
Return
• Press and hold to talk to the
Baby Unit.
• While in a submenu, press
to exit.
7
Volume
• Press to view the volume
adjustment bar.
>
3ft (1m)
<
3ft (1m)
7
0
25
.5°C
7
0
25
.
5
°
C
Long press
Status Bar Icons
or
Current view status
• The Baby Unit number that is being viewed
when in:
- Single Baby Unit mode.
- Patrol mode
(* For LF915-2HD or pairing with LF920-0HD)
- Split mode
(* For LF915-2HD or pairing with LF920-0HD)
Split mode
(* For LF915-2HD or pairing with LF920-0HD)
Patrol mode
(* For LF915-2HD or pairing with LF920-0HD)
Black and white night vision is activated.
Color night vision is activated.
Motion detection and alert is turned on.
Sound detection and alert is turned on.
Melodies or soothing sounds are playing.
Night light is turned on and the automatic
brightness setting is turned off.
Night light is turned on and the automatic
brightness setting is turned on.
Parent Viewer speaker is muted.
Temperature alert is turned on.
50
50
Humidity is lower than 30%.
Humidity is within 30-60%.
Humidity is higher than 60%.
˚
F
Temperature is lower than 68°F.
˚
F
Temperature is between 68-75°F.
˚
F
Temperature is higher than 75°F.
Battery level indicator
8
Zoom
9
Power / LCD Off
10 Microphone
11 Antenna
12 Power jack
13 RESET
• Force reboot the
Parent Viewer.
14 Stand
70
25.5°C
70
25
.5°
C
Press and hold
70
2
5
.5°
C
70
F
F
Tip: Do your icons look a little different? Your baby monitor has undergone a recent software update.
Go to our online manual for an overview of the latest icons (See Online Help).