User's Manual

Telephone operation
30
Options while on calls
Blind transfer
°»¼¿¸ÂÁ´ÁÂÈÇƼ·¸¶´¿¿ÌÂÈ¶´ÁÇÅ´Áƹ¸Å¼ÇÇÂ´Æø¶¼è¶»´Á·Æ¸ÇÂÅ´ÁÌ
handset. This feature is not available for model CRL82112 unless you purchase
an accessory handset (AT&T model CRL80112).
To transfer an outside call directly without notifying the desired
handset:
1. During the call, press MENU/
SELECT.
2. Press
MENU/SELECT to choose >Transfer.
f If you have a two-handset system, the outside call is put
on hold and your handset screen shows Transferring
call.... The other handset rings and its screen shows
Transfer from other handset.
f If you have more than two handsets, your screen shows
TRANSFER TO:. Use the dialing keys to enter a specific
handset number (1-9 for handsets 1-9, TONE
followed
by 0-2 for handsets 10-12, or TONE
followed by # for all
handsets), or press T
CID or SDIR to scroll to the desired
handset and press
MENU/SELECT. The outside call is put
on hold and your handset screen shows Transferring
call... or Transferring call to all....
The other handset(s) rings and shows Transfer from HANDSET X (X
represents the handset number).
3. To answer the call on the destination handset, press
PHONE/FLASH or
/SPEAKER, or any dialing key (0-9, TONE , or #). The original handset
shows Call transferred and goes to idle mode.
NOTES:
f To cancel the transfer and return to the external call before the blind transfer call is
answered, press
OFF/CANCEL on your handset.
f If the other handset does not answer the transfer within 30 seconds, the transfer ends and
the original handset rings while showing No response to transfer. If the original handset
does not pick up within 30 seconds, the handset returns to idle mode and the outside
call ends.
>Transfer
Intercom
TRANSFER TO:
>HANDSET 2

Phone 0:00:12
10/15
10:01
AM