User's Manual

23
Telephone settings
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
To set the dial mode:
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Use T
CID or SDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use T
CID or SDIR to scroll to >Dial mode, then press
MENU/SELECT.
4. Use T
CID or SDIR to highlight >Touch-tone or >Pulse, then press MENU/SELECT.
The screen shows DIAL MODE is touch-tone or DIAL MODE is pulse. There is
a confirmation tone and the screen returns to the previous menu.
QUIET mode
When QUIET mode is turned on, the telephone silences all sounds during the
ƸÇøż·¹ǼÀ¸»ÂÈÅÆì¸ÅÌÂÈÇÈÅÁÂÁQUIET mode, this feature
activates immediately and the answering system turns on automatically.
When QUIET mode is on, the answering system takes calls and records
messages without broadcasting them.
To turn QUIET mode on:
1. Press and hold QUIET # in idle mode to enter the QUIET mode setting
screen. The screen shows Quiet: _ _ hours (1-12 hours).
2. Use the dialing keys to enter the desired number of hours (1-12) you would
like to turn on QUIET mode, then press
MENU/SELECT. Your screen briefly
shows Answering sys is ON and then Quiet mode on.
ÂÇÈÅÁª®¢À·¸Âæ
f While QUIET mode is on, press and hold QUIET #. The screen then shows
Quiet mode is off and you hear a confirmation tone.
NOTES:
f If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features
when QUIET mode is on, the sample plays but the feature is still muted after saving the setting.
f After QUIET mode is turned off or the set period of time has expired, all muted features will be
activated again.
DIAL MODE
>Touch-tone
Home area code
>Dial mode