Quick Start Guide

15
»¼ÆÃÅ·ȶÇÆÈÃÃÂÅÇÆ¶´¿¿¸Å¢ƸÅɼ¶¸ÆÂæ¸Å¸·µÌÀÂÆÇǸ¿¸Ã»ÂÁ¸ƸÅɼ¶¸
providers. The telephone stores caller ID information of the last 30 incoming calls in
the telephone base. This information is common to all devices.
Review and dial a number in the call log
1.
CID in idle mode -> or to scroll through the list.
2. PHONE/FLASH or /SPEAKER to call when the desired entry is
displayed.
Save a caller ID log entry to the directory
1.
CID in idle mode -> or to scroll through the list.
2. When your desired caller ID entry displays on the handset -> SELECT.
3. SELECT again to choose To Directory.
4. Edit the telephone number if needed -> SELECT.
5. Edit the name if needed -> SELECT to save.
Caller ID
Directory
The directory can store up to 50 entries, which are shared by all system devices.
Operation Steps
Adding an entry in
the directory
1. MENU -> or -> Directory -> SELECT.
2. SELECT again to choose Add new entry.
3. Enter a telephone number up to 30 digits ->
SELECT
.
4. Enter a name up to 15 characters -> SELECT to save.
Searching/dialing an
entry
1.
DIR in idle mode -> / to select the desired
directory entry.
2. PHONE/FLASH or /SPEAKER to call.
Adding a call log
entry in the directory
1.
CID -> or -> SELECT to select the desired
entry.
2. SELECT again to choose To Directory.
3. Edit the telephone number if needed -> SELECT.
4. Edit the name if needed -> SELECT to save.