User's Manual

51
I cannot dial out.
• Make sure there is a dial tone
before dialing. It is normal if
the handset takes a second
ou|o|ovm1_uomb;b|_
the telephone base before
producing a dial tone. Wait an
extra second before dialing.
• Eliminate any background
noise. Mute the handset before
dialing, or dial from another
room in your home with less
background noise.
The display shows No line.
I cannot hear the dial tone.
• Disconnect the telephone
line cord from your telephone
and connect it to another
telephone. If there is no dial
tone on that other telephone
either, then the telephone line
1ou7l-0;7;=;1ঞ;ĺ$u
installing a new telephone line
cord. If changing telephone
line cord does not help, the
wall jack (or the wiring to this
-ѴѴf-1hől-0;7;=;1ঞ;ĺ
Contact your telephone service
provider.
• You may be using a new cable
ou(ov;ub1;ķ|_;;bvঞm]
telephone jacks in your home
may no longer work. Contact
your service provider for
voѴঞomvĺ
The display shows To register HS...
and ...see manual alternately. The
handset does not work at all.
The handset is deregistered from
the telephone base.
Place the handset in the
telephone base to register it back.
[;u-0o|ƐƏv;1om7vķ|_;
handset displays Registering....
)_;m|_;u;]bv|u-ঞomruo1;vv
completes, the handset displays
Registered and you hear a beep.
$_;u;]bv|u-ঞomruo1;vv|-h;v
about 90 seconds.
;Ѵr